Datasheet4U Logo Datasheet4U.com

BD7907FS - 6-channel Combo driver IC

General Description

BD7907FS is a 6-channel driver IC that integrates all drivers necessary for CD-ROM, and DVD-ROM systems into a single chip.

The built-in 2-channel sled motor driver is used for the stepping motor.

Key Features

  • 1) Motor drivers for spindle, sled (2-channel) and loading, and actuator drivers for tracking are all integrated into a single chip. 2) ON/OFF for each driver, brake mode switching of spindle and stand-by mode switching can be controlled by 2-wire serial data. 3) Built-in triangular-wave generator 4) SSOP-A54 package 5) Built-in thermal shut-down circuit 6) Highly efficient by applying the PWM drive and Low ON resistance POWER MOSFET 7) Built-in current limit, hall bias, short b.

📥 Download Datasheet

Datasheet Details

Part number BD7907FS
Manufacturer ROHM
File Size 172.02 KB
Description 6-channel Combo driver IC
Datasheet download datasheet BD7907FS Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD790 Complementary Plastic Silicon Power Transistors Motorola Inc
BD791 NPN Plastic Silicon Power Transistor ON Semiconductor
BD791 Silicon NPN Power Transistor Inchange Semiconductor
BD791 NPN Silicon Power Transistor Motorola
BD792 (BD789 - BD792) Complementary Plastic Silicon Power Transistors Motorola Semiconductor

Other Datasheets by ROHM

Part Number Description
BD7902CFS 6CH Power Driver for CD-ROM/ DVD-ROM
BD7904FS 5ch Power Driver
BD7905BFS 6CH Power Driver for CD-ROM/ DVD-ROM
BD7931F 0.5 Amp or Less Reversible Motor Drivers
BD7956FS 7ch Power Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
01W138A 6-channel Combo driver IC BD7907FS Description BD7907FS is a 6-channel driver IC that integrates all drivers necessary for CD-ROM, and DVD-ROM systems into a single chip. The built-in 2-channel sled motor driver is used for the stepping motor. Low heat operation can be achieved by applying the PWM driving system for sled and spindle motor drivers. 13.4±0.3 11.4±0.2 Dimension (Units : mm) 22.0±0.2 54 28 Features 1) Motor drivers for spindle, sled (2-channel) and loading, and actuator drivers for tracking are all integrated into a single chip. 2) ON/OFF for each driver, brake mode switching of spindle and stand-by mode switching can be controlled by 2-wire serial data.