Datasheet4U Logo Datasheet4U.com

BP5311 - Power supply unit for LCD drives

General Description

BP5311 FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCTL = 5V, and R1 and R2 resistors are disconnected) 370 Regulator ICs FMeasurement circuit and application example BP5311 FElectrical characteristic curves 371 Regulator ICs FExternal dimensions (Units: mm) BP5311 372

Key Features

  • 1) High conversion efficiency. 2) Built-in protection circuit. 3) Built-in ON / OFF switch. 4) Compact and light. 5) Surface mounting is possible because parts are concentrated on one side. FAbsolute maximum ratings (Ta = 25_C) FBlock diagram 369 Regulator ICs FPin.

📥 Download Datasheet

Datasheet Details

Part number BP5311
Manufacturer ROHM
File Size 64.69 KB
Description Power supply unit for LCD drives
Datasheet download datasheet BP5311 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BP5336H Multi-segments AC/DC Linear LED Driver BPS
BP5353H Multi-segments AC/DC Linear LED Driver BPS
BP5356H Multi-segments AC/DC Linear LED Driver BPS
BP5358H LED controller BPS
BP5001 Resistor Dimming Interface Controller BPS

Other Datasheets by ROHM

Part Number Description
BP5311A DC / DC converter
BP5311xA DC / DC converter
BP5310 PCMCIA / flash memory power supply
BP5313 Power supply unit for LCD drives
BP5317 Surface-mount power supply unit for LCD drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Regulator ICs Power supply unit for LCD drives BP5311 The BP5311 is a DC-DC converter unit for supplying power to liquid crystal display (LCD) panels. The unit supplies a positive voltage for LCDs from a logic circuit power supply ()5V) FApplications LCD panels in personal computers and word processors FFeatures 1) High conversion efficiency. 2) Built-in protection circuit. 3) Built-in ON / OFF switch. 4) Compact and light. 5) Surface mounting is possible because parts are concentrated on one side.