KF2003-GR40A
Features
1) Both ROHM’s advanced LSI technology and proprietary partial glaze are used to realize higher printing efficiency. With a high print speed of 100mm/s, this series is also suitable for thermal transfer printing. 2) Besides the fact that harness-type direct connectors at either end allow wring to be fitted as convenient, the thermal printheads can be applied directly to the substrate without a heat sink. Both these features give engineers greater freedom when designing the printer mechanism. 3) One rank resistance value of 800Ω ± 3% eliminates the inconvenience of rank selection.
!External dimensions (Units : mm)
83 (HEATSINK WIDTH) 72 (EFFECTIVE PRINT WIDTH) DOT #576
DOT #1
Max.1.7 5.85
EPOXY RESIN COATED
16±0.2
15.1±1
2.6±0.1
No.9 CONNECTOR B No.1 No.9 ax
.φ
.0
No.1 CONNECTOR A
2-M3 (EFFECTIVE DEPTH 4.5) 5 73
1/4
Printheads
!Equivalent circuit
VH GND 8,9 1,2 DOT #576 DOT #1 1,2 8,9 VH GND
4 STB4 STB3 5
1 7 6 STB1 STB2
LACTH...
