KF2004-GR40A
Features
1) Both ROHM’s advanced LSI technology and proprietary partial glaze are used to realize higher printing efficiency. With a high print speed of 100mm/s, this series is also suitable for thermal transfer printing. 2) Besides the fact that harness-type direct connectors at either end allow wring to be fitted as convenient, the thermal printheads can be applied directly to the substrate without a heat sink. Both these features give engineers greater freedom when designing the printer mechanism. 3) One rank resistance value of 800Ω ± 3% eliminates the inconvenience of rank selection.
!External dimensions (Units : mm)
119 (HEATSINK WIDTH) DOT #864
16 15.1
Max. 1.7 5.85 DOT #1
Max . φ1 4.0
108 (EFFECTIVE PRINT WIDTH)
No.9
No.1
No.9
No.1
CONNECTOR B
CONNECTOR A
109 2-M3
1/4
Printheads
!Equivalent circuit
VH GND 8,9 1,2 DOT #864 DOT #1 1,2 8,9 VH GND
6 STB4 STB3 5 6
1 7 STB1 6 STB2
5 LATCH REGISTER DI V DD 7 SHIFT REGISTER 4...
