MNA14 Datasheet | ROHM

Features 1) Area ratio is approximately 55% smaller than that of the MCH18, enabling high - density mounting. 2) Mounting costs are reduced. 3) Use of convex electrodes prevents solder bridging during mounting, and makes it easy to perform a visual inspection of the mounted piece. Also facilitates automatic inspection. 4) Barrier layer and end terminations to improve solderability. 5) Each element is independent to ensure a wide range of circuit applications. 6) Can be packed on tape. !External dimensions (Units : mm) 0.55±0.1 0.7±0.2 0.09 0.15 + - 0.12 0.85±0.1 0.8±0.1 3.2±0.2 0.8±0.1 ∗Land pattern in 0.8mm pitch between each electrode is remended. !Structure !Equivalent circuits C1 C2 C3 C4 C1 = C 2 = C 3 = C 4 External electrode ΙΙΙ (coating layer) Internal electrode Ceramic element External electrode ΙΙ (barrier layer) External electrode Ι (thick membrane layer) ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 1.6±0.2 .. Ceramic capacitors !Product designation Code Product thickness Packaging specifications Reel K 0.8mm Paper tape (width 8 mm, pich 4 mm) φ180mm (7in.) Reel (φ180mm) : patible with EIAJ ET-7200A Basic ordening unit (pcs.) 4,000 Part No. Packaging style Rated voltage Code Voltage 2 25V 5 50V 1 4 1 0 1 Nominal Capacitance tolerance Capacitance-temperature characteristics tolerace Code EIA code Operating temperature range (°C) Temp. coefficient or percent change capacitance Code A C0G - 55 ~ +125 0 ± 30ppm / °C ± 10% 3-digit designation K CN X7R - 55 ~ +125 ± 15% according IEC M ±...