Datasheet4U Logo Datasheet4U.com

RPM871-H7 - IrDA Infrared communication Module

Description

Pin No 1, 4 2 Terminal GND NC Circuit Function GND Pin1 and pin4 must be connected to the ground.

This Terminal must be left open.

VCC For preventing from infection, connect a capacitor between VCC (3pin) and GND (4pin).

Features

  • 1) Applied to IrDA version 1.2. (Low Power) 2) Designed for low power consumption at stand-by for receiving (Typ.73µA). 3) Suitable for sets driven by battery due to power down control function. 4) Power supply voltage range : 2.6V∼3.6V 5) Constant LED load resistance can change communication range. (Approx. 20∼60cm) !.

📥 Download Datasheet

Datasheet preview – RPM871-H7

Datasheet Details

Part number RPM871-H7
Manufacturer ROHM
File Size 93.11 KB
Description IrDA Infrared communication Module
Datasheet download datasheet RPM871-H7 Datasheet
Additional preview pages of the RPM871-H7 datasheet.

📁 Similar Datasheet

Other Datasheets by Rohm
  • RPM871 - IrDA Infrared communication Module
  • RPM870-H7 - IrDA wireless communication transceiver IC
  • RPM872-H7 - IrDA infrared communication module
  • RPM873 - IrDA Infrared Communication Module
  • RPM851 - IrDA wireless communication transceiver IC
  • RPM851A - IrDA wireless communication transceiver IC
  • RPM-012PB - High Sensitivity Chip Sensor
  • RPM-075PT - Phototransistor

Full PDF Text Transcription

Click to expand full text
RPM871-H7 Photo Link Module IrDA Infrared communication Module RPM871-H7 RPM871-H7 is an infrared communication module for IrDA Ver. 1.2 (Low Power). The infrared LED, PIN photo diode, waveform shaping LSI are all integrated into a single package. This module is designed with power down function and low current consumption at stand-by mode. The ultra small package makes it a perfect fit for mobile devices. !Features 1) Applied to IrDA version 1.2. (Low Power) 2) Designed for low power consumption at stand-by for receiving (Typ.73µA). 3) Suitable for sets driven by battery due to power down control function. 4) Power supply voltage range : 2.6V∼3.6V 5) Constant LED load resistance can change communication range. (Approx. 20∼60cm) !Applications Cellular phones, PDAs, etc.
Published: |