Datasheet4U Logo Datasheet4U.com

SLR-325 - Reflecting small LEDs/ directly mountable (3.2 mm)

Key Features

  • 1) Can be directly mounted on a printed circuit board. 2) Available on tape to allow mounting using a 5 mm pitch machine without lead forming. 3) A low overall height of 5.5 mm makes it possible to design a slim unit. 4) Large flange eliminates wobbling after mounting (stable before and after soldering). 5) LED arrays at a conventional 4 mm pitch are also possible. 6) High reliability. FSelection guide FExternal dimensions (Units: mm) FAbsolute maximum ratings (Ta = 25_C) 61 LED lamps FElectr.

📥 Download Datasheet

Datasheet Details

Part number SLR-325
Manufacturer ROHM
File Size 187.06 KB
Description Reflecting small LEDs/ directly mountable (3.2 mm)
Datasheet download datasheet SLR-325 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SLR1050 Shielded Power Inductors Coilcraft
SLR1050A-101KE Shielded Power Inductors Coilcraft
SLR1050A-121KE Shielded Power Inductors Coilcraft
SLR1050A-151KE Shielded Power Inductors Coilcraft
SLR1050A-221KE Shielded Power Inductors Coilcraft

Other Datasheets by ROHM

Part Number Description
SLR-322 Reflecting small LEDs/ directly mountable (3.1 mm x 2 mm)
SLR-332DC LED
SLR-332DU LED
SLR-332MC LED
SLR-332MG LED

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LED lamps Reflecting small LEDs, directly mountable (φ3.2 mm) SLR-325 Series The SLR-325 series are small 3.2 mm LEDs with a lead pitch of 5 mm which can be directly mounted on a printed circuit board. Two colors and four lens types are available for a total of eight types, and they are suitable for use in a wide variety of applications. FFeatures 1) Can be directly mounted on a printed circuit board. 2) Available on tape to allow mounting using a 5 mm pitch machine without lead forming. 3) A low overall height of 5.5 mm makes it possible to design a slim unit. 4) Large flange eliminates wobbling after mounting (stable before and after soldering). 5) LED arrays at a conventional 4 mm pitch are also possible. 6) High reliability.