SS1050 Datasheet Unipolar Hall-effect Digital Switch

Manufacturer: SEC

Overview: SS1050 Unipolar Hall-Effect Digital Switch Packages 3 pin SOT23 (suffix SO) 3 pin SIP (suffix.

Datasheet Details

Part number	SS1050
Manufacturer	SEC
File Size	183.76 KB
Description	Unipolar Hall-Effect Digital Switch
Datasheet	SS1050-SEC.pdf

General Description

Hall Plate GND SIP Package Pin 1 – VDD Pin 2 – GND Pin 3 – OUT SOT Package Pin 1 – VDD Pin 2 – OUT Pin 3 – GND The SS1050 is a unipolar Hall-effect sensor IC fabricated from bipolar technology.

The device integrates a voltage regulator, reverse battery protection diode, Hall sensor with dynamic offset cancellation system, temperature compensation circuitry, small signal amplifier, Schmitt trigger and an open-collector output to sink up to 25 mA.

With suitable output pull up, they can be used with bipolar or CMOS logic circuits.

Key Features

4.5V to 24V Operation.
-40°C to 150°C Superior temperature operation.
Bipolar technology.
Open-collector 25 mA output.
Reverse battery protection.
Small Size SOT23 3L or SIP 3L.
Solid-state reliability.
Resistant to physical stress.
Activate with small, commercially available Permanent magnets Functional Block Diagram.

SS1050 Distributor

Similar Datasheet

Brand Logo	Part Number	Description	Manufacturer
ZHIDE	SS1050	SCHOTTKY BARRIER RECTIFIER	ZHIDE

More Datasheets from SEC

Part Number	Description
SS1034	Unipolar Hall-Effect Digital Switch
SS1068	Unipolar Hall-Effect Digital Switch
SS1072	Unipolar Hall-Effect Digital Switch
SS1101	Unipolar Hall Switch-Low Sensitivity
SS1101-A	Unipolar Hall Switch-Low Sensitivity
SS1102	Unipolar Hall Switch-Low Sensitivity
SS1103	Unipolar Hall-Effect Digital Switch
SS1104	Unipolar Hall Switch-Low Sensitivity
SS1139	Unipolar Hall-Effect Digital Switch
SS1160	Unipolar Hall-Effect Digital Switch