SS1072 Datasheet Unipolar Hall-effect Digital Switch

Manufacturer: SEC

Overview: Packages 3 pin SOT23 (suffix SO) SS1072 Unipolar Hall-Effect Digital Switch 3 pin SIP (suffix.

Datasheet Details

Part number	SS1072
Manufacturer	SEC
File Size	183.79 KB
Description	Unipolar Hall-Effect Digital Switch
Datasheet	SS1072-SEC.pdf

General Description

The SS1072 is a unipolar Hall-effect sensor IC fabricated from bipolar technology.

The device integrates a voltage regulator, reverse battery protection diode, Hall sensor with dynamic offset cancellation system, temperature compensation circuitry, small signal amplifier, Schmitt trigger and an open-collector output to sink up to 25 mA.

With suitable output pull up, they can be used with bipolar or CMOS logic circuits These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150°C, and are more stable with both temperature and supply voltage changes.

Key Features

4.5V to 24V Operation.
-40°C to 150°C Superior temperature operation.
Bipolar technology.
Open-collector 25 mA output.
Reverse battery protection.
Solid-state reliability.
Resistant to physical stress.
Small Size SOT23 3L or SIP 3L.
Activate with small, commercially available Permanent magnets Functional Block Diagram VDD Voltage Regulatr Chopper OUT.

SS1072 Distributor

More Datasheets from SEC

Part Number	Description
SS1034	Unipolar Hall-Effect Digital Switch
SS1050	Unipolar Hall-Effect Digital Switch
SS1068	Unipolar Hall-Effect Digital Switch
SS1101	Unipolar Hall Switch-Low Sensitivity
SS1101-A	Unipolar Hall Switch-Low Sensitivity
SS1102	Unipolar Hall Switch-Low Sensitivity
SS1103	Unipolar Hall-Effect Digital Switch
SS1104	Unipolar Hall Switch-Low Sensitivity
SS1139	Unipolar Hall-Effect Digital Switch
SS1160	Unipolar Hall-Effect Digital Switch