Datasheet4U Logo Datasheet4U.com

SW7230 - Adaptive 100/120Hz Current Ripple Remover

Description

TYPICAL APPLICATION www.semipower.com.cn 1 SW7230 Adaptive 100/120Hz Current Ripple Remover (Max 1A) ORDERING INFORMATION PART MARKING SW7230 PACKAGE DESCRIPTION TO252-5L Top Marking SW7230 Package Form PIN CONFIGURATION Top View eSOP8 ABSOLUTE MAXIMUM RATING 1） VIN PIN 60V LED PIN VC, V

Features

  • Adaptive 100/120Hz current ripple remover Input voltage range 5V~60V Built-in 60V power MOSFET LED voltage low to 0.4V when LED current is 1.3A Programmable amplitude of LED current ripple Programmable maximum cathode voltage of LED Internal LED current limitation Short protection Hot plug protection Over temperature protection TO252-5L Package SW7230 is used to drive a LED string (.

📥 Download Datasheet

Datasheet preview – SW7230

Datasheet Details

Part number SW7230
Manufacturer SEMIPOWER
File Size 1.07 MB
Description Adaptive 100/120Hz Current Ripple Remover
Datasheet download datasheet SW7230 Datasheet
Additional preview pages of the SW7230 datasheet.

📁 Similar Datasheet

  • SW7201 - I2C Buck-Boost Charge-Discharge Controller (ISMARTWARE)
  • SW7203 - NVDC Buck-Boost Charge-Discharge Controller (ISMARTWARE)
  • SW70N10V - N-channel MOSFET (Samwin)
  • SW7125D - Ultra-Low Noise Amplifier (SILICON wave)
  • SW7126D - Ultra-Low Noise Amplifier (SILICON wave)
  • SW7135 - Fully-integrated Front-End Module (SILICON wave)
  • SW730 - N-Channel MOSFET (SAMWIN)
  • SW740 - N-Channel MOSFET (SAMWIN)
  • SW75 - Brick Light (Smart Vision Lights)
  • SW75-xxx - Brick Light (Smart Vision Lights)
Other Datasheets by SEMIPOWER

Full PDF Text Transcription

Click to expand full text
SW7230 Adaptive 100/120Hz Current Ripple Remover Max Input Current ≤1A Parameters Subject to Change Without Notice FEATURES            Adaptive 100/120Hz current ripple remover Input voltage range 5V~60V Built-in 60V power MOSFET LED voltage low to 0.4V when LED current is 1.3A Programmable amplitude of LED current ripple Programmable maximum cathode voltage of LED Internal LED current limitation Short protection Hot plug protection Over temperature protection TO252-5L Package SW7230 is used to drive a LED string (<60V), and remove the 100/120Hz current ripple on AC/DC power by a capacitor between VC and GND. By sensing the LED pin voltage via a resistor divider, SW7230 allows user to setup the maximum cathode voltage of LED string.
Published: |