Semtech Corporation ACS8514
The ACS8514 is an optional partner integrated circuit for applications using the ACS8520/30. It adds an additional BITS clock (T4 path) DPLL to a clock synchronization system, for applications needing two T4 paths (e.g. An alternative use for this DPLL is as an input extender such that the ACS8514 automatically selects one of 14 clock sources, its output then feeds the ACS8530/20 which can also select another 13 sources, giving a total input selection range of 27 sources.| Part No. | ACS8514 |
|---|---|
| Datasheet | ACS8514 Download |
| Manufacturer |  Semtech Corporation |
| Description | Synchronous Equipment Timing Source Partner |
| Buy | Stock & Price |
DESCRIPTION
FINALFEATURES
DATASHEET to GR-253 figure 5-21). An additional 13 sources can be added for each ACS8514 added. An additional highly accurate phase and frequency monitor is also available that can be used to carry out more detailed analysis of standby clock reference sources. This extra monitor is actually another DPLL which under software control could be set to sequentially analyze each input. It can check phase from 0.7º to 23000º and frequency from 0.0003ppm to 80 ppm. An approximate MTIE measurement could be calculated for each reference input as an extra quality check. Simultaneous activity and coarse frequency monitoring of all input sources is performed in the same way as on the ACS8520/30. These can be used to automatically qualify and select sources for the extra T4 path or for input selection for the ACS8520/30 when the ACS8514 is used as an input extender. ♦ Partner to the ACS8520 & ACS8530 for use in SONET Minimum Clock (SMC) or SONET/SDH Equipment Clock (SEC) a...
