Semtech Corporation GS2965
The GS2965 is a multi-rate serial digital reclocker designed to automatically recover the embedded clock from a digital video signal and retime the incoming video data. It will recover the embedded clock signal and retime the data from a SMPTE 424M, SMPTE 292M, or SMPTE 259M-C compliant digital video signal. The GS2965 can operate in either auto or manual rate selection mode.| Part No. | GS2965 |
|---|---|
| Datasheet | GS2965 Download |
| Manufacturer |  Semtech Corporation |
| Description | Multi-Rate SDI Reclocker |
| Buy | Stock & Price |
FEATURES
● SMPTE 424M, SMPTE 292M and SMPTE 259M-C compliant● Supports DVB-ASI at 270Mb/s
● Single supply operation at 3.3V or 2.5V
● 180mW typical power consumption (213mW with RCO enabled) at 2.5V
● Input signal equalization and output-signal de-emphasis settings to compensate for board-trace dielectric losses
● 2:1 input multiplexer patented technology
● Choice of dual reclocked data outputs or one reclocked data output and one clock output
● Uses standard 27MHz crystal
● Differential inputs and outputs support DC coupling to industry-standard differential logic on-chip 100Ω differential data input/output termination selectable 400mVppd or 800mVppd output swing on each output seamless interface to other Gennum products
● 4 wire SPI host interface for device configuration and monitoring
● Standard logic control and status signal levels
● Auto and Manual modes for rate selection
● Standards indication in Auto mode
● Lock Detect Output
● Mute, Bypass and Autobypass functions
●...
