RClamp0521PA Datasheet | SEMTECH

Low Capacitance RClamp® 1-Line ESD Protection PROTECTION PRODUCTS Description Rail Clamp® TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive ponents which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). RClamp®0521PA has a maximum capacitance of only 0.5p F. This allows it to be used on circuits operating in excess of 10GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15k V air, ±12k V contact discharge). RClamp0521PA is in a 2-pin SLP1006P2 package measuring 1.0 x 0.6 x 0.5mm. The leads are spaced at a pitch of 0.65mm. Each device will protect one highspeed line operating at 5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. The bination of small size, low capacitance, and high ESD surge capability makes them ideal for use in applications such as cellular phones and digital video interfaces. Features - High ESD withstand Voltage: +/-12k V (Contact) and +/-15k V (Air) per IEC 61000-4-2 - Ultra-small package (1.0 x 0.6 x 0.5mm) - Protects one data or I/O line - Low ESD clamping voltage - Working voltage: ±5.0V - Low capacitance: 0.5p F Max. - Low leakage current - Solid-state silicon-avalanche technology Mechanical Characteristics - SLP1006P2 package - Molding pound flammability rating: UL 94V-0 - Pb-Free, Halogen Free, Ro HS/WEEE pliant - Lead Finish: Lead-Free - Marking: Marking code - Packaging: Tape and Reel Applications - Cellular Handsets & Accessories - Digital Visual Interface (DVI) - Display Port - MDDI Ports - USB Ports - PCI Express - Serial...