Datasheet4U Logo Datasheet4U.com

RClamp2574NQ - High Power TVS

General Description

RailClamp® TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (cable discharge events), and EFT (electrical fast transients).

Key Features

  • a true operating voltage of 2.5 volts for superior protection. The RClamp2574NQ is in a 10-pin SLP3020N10 package. It measures 3.0 x 2.0 x 0.60mm. The leads are finished with lead-free NiPdAu. RClamp®2574NQ is qualified to AEC-Q100 Grade 1. RClamp2574NQ High Power TVS for Ethernet Interfaces Features ‹ Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ±30kV (air), ±30kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 40A (8/20µs) ‹ Array of surge rated d.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP2504N 2.5V & 3.3V TVS Arrays Semtech Corporation
RCLAMP2504P (RCLAMP2504P / RCLAMP3304P) 2.5V & 3.3V TVS Arrays Semtech Corporation
RCLAMP2402B Ultra-Low Capacitance TVS Semtech Corporation
RCLAMP0502A Low Capacitance TVS Array Semtech Corporation
RCLAMP0502N Low Capacitance TVS Array Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
RClamp2574N High Power TVS
RClamp2594N 4-Line Surge and ESD Protection
RClamp2261ZA 22V EOS Protection
RClamp2431TQ 24V ESD Protection
RClamp2451ZA 24V ESD Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - RailClamp® Description RailClamp® TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (cable discharge events), and EFT (electrical fast transients). The unique design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. The RClamp®2574NQ is designed to replace up to two components for board level GbE protection. Each device is designed to protect two line pairs. This is accomplished by routing traces through the device. When connected in this fashion, the device can withstand a high level of surge current (40A, 8/20us) while maintaining a low loading capacitance of less than 5pF.