SC2621 Datasheet PDF | Semtech Corporation

Semtech Corporation SC2621

The SC2621 provides the control and protection features necessary for a synchronous buck converter and a linear regulator in high performance graphic card applications. The SC2621 is designed to directly drive the top and bottom MOSFETs of the buck converter. It uses an internal 8.2V supply as the gate drive voltage for minimum driver power loss and MOSFET switching loss.

Part No.	SC2621
Datasheet	SC2621 Download
Manufacturer	Semtech Corporation
Description	500kHz Voltage Mode PWM Controller
Buy	Stock & Price

DESCRIPTION

It allows the converter to operate at 500kHz switching frequency with 4V to 16V power rail and as low as 0.5V output. The SC2621 is capable to drive a N-type MOSFET in a linear regulator with as low as 0.5V output. The SC2621 features soft-start, supply power under voltage lockout, and hiccup mode over current protection. The SC2621 monitors the output current by using the Rdson of the bottom MOSFET in the buck converter that eliminates the need for a current sensing resistor. The SC2621 is offered in a SOIC-14 package. SC2621

FEATURES

u u u u u u u u u 500kHz switching frequency 4V to 16V power rails Internal LDO for optimum gate drive voltage 1.5A gate drive current Programmable output voltages Internal soft start Power rail under voltage lockout Hiccup mode short circuit protection SOIC-14 package

APPLICATIONS

u Graphics processor power supplies on PCI-Express platform u Embedded, low cost, high efficiency converters u Point of load power supplies Typical Application Cir...