Semtech Corporation SC4210
The SC4210 Linear Regulator Controller includes all the features required for an extremely low dropout linear regulator that uses an external N-channel MOSFET as the pass transistor. The device can operate from input voltages as low as 4V and can provide high current levels, thus providing an efficient linear solution for custom processor voltages, bus termination voltages, and other logic level voltages down to 0.5V. The on board charge pump creates a gate drive voltage capable of driving an external N-MOSFET which is optimal for low dropout voltage and high efficiency.| Part No. | SC4210 |
|---|---|
| Datasheet | SC4210 Download |
| Manufacturer |  Semtech Corporation |
| Description | 8-Pin N-FET Linear Regulator Controller |
| Buy | Stock & Price |
DESCRIPTION
The wide versatility of this IC allows the user to optimize the setting of both current limit and output voltage for applications beyond or between standard 3-terminal linear regulator ranges. ing technique that provides peak transient loading capability while limiting the average power dissipation of the pass transistor during fault conditions. The SC4210 is available in an MSOP-8 surface mount package. SC4210 PRELIMINARYFEATURES
On-board charge pump to drive external N-MOSFET Input voltage as low as 4V, up to 15V Duty ratio mode over-current protection Extremely low dropout voltage Low external parts count Output voltages as low as 0.5V MSOP-8 packageAPPLICATIONS
Telecom and networking cards Industrial applications Wireless infrastructure Set-top boxes Post regulated power supplies The 8-pin controller IC features a duty ratio current limit- Typical Application Circuit w R1 0.03 Vin = 14V w C1 10µF 1 w C2 0.01 VDD CS 8 .D 2 CAP CT 7 C3 0.01 3 C5...
