Semtech Corporation TS13101
The TS13101 is a galvanically isolated 60V power switch device with bi-directional blocking. The device includes a single integrated 110mOhm high voltage FET allowing high efficiency switching of power loads or other high current applications. The input pin, CLK, controls the turn on/off of the switch.| Part No. | TS13101 |
|---|---|
| Datasheet | TS13101 Download |
| Manufacturer |  Semtech Corporation |
| Description | Galvanic Isolated Latching 60V Power Load Switch |
| Buy | Stock & Price |
FEATURES
● Low Quiescent Operating Currents 2uA in OFF state 4uA in ON state● Scalable galvanic isolation from primary to secondary sides of the device
● Single control signal for on/off input (CLK) Operation from 2.9V to 5.5V compatible with standard microcontrollers
● Switch Characteristics High voltage switch with bi-directional blocking in OFF state Single switch device 60V switch and 110mohm Rdson Up to 4A operating current Specification
● Junction operating temperature -40 °C to 125 °C
● Packaged in a 20pin QFN (4x4)
DESCRIPTION
When the correct CLK sequence is provided the switch will latch on and stay on until the turn off sequence is given or a fault is detected. The TS13101 includes several protection features. Each FET has an integrated over-current shut-down to prevent device damage during short-circuit or other unusually high load conditions. If an over-current event is detected for a time the FET is latched off until the CLK turn off sequence is given.
