LD330
LD330 is Setra Local Display manufactured by SETRA.
Setra Local Display Model LD330
Installation and Operating Instructions.
Setra’s Model LD330 is a small local display designed for convenient in-line installation. It can be used with voltage output and current output tranducers 4-pin bayonet connectors (which meet dimensional requirements of MIL-C-26482 and the MIL STD 3116) Amp jack, 15 Pin and 9 Pin D-Sub connectors.
1.0 INSTALLATION
The LD330 can be supplied with a variety of integral electrical connectors to connect to the mating connectors on the transducer. Consult part number chart below to determine the proper configuration. For setting optimum viewing angle, the LD330 display housing can rotate, at least 270 degrees, with respect to the connector. DO NOT ATTEMPT TO FORCE ROTATIONAL ADJUSTMENT BEYOND STOP POSITION. The LD330 is available in a variety of configurations.
2.0 ELECTRICAL CONNECTIONS
The LD330 can be supplied with different style connectors to the input transducer and to the power supply. The power supply can be supplied with cable, also. Confirm the electrical connection supplied , and refer to the appropriate column below for proper connections.
2.1 Voltage Units
9 PIN D-SUB PIN 4 1 8 9 SHELL 15 PIN D-SUB PIN 7 2 12 5 SHELL 5 PIN MINI-DIN PIN 1 2 4 5 3
CONNECTION + EXCITATION + OUTPUT
- OUTPUT
- EXCITATION CASE GND
CABLE WIRE RED GREEN WHITE BLACK DRAIN
BAYONET PIN A B C D SHELL
MOLEX 2 1 4 5 6
2.2 Current Units
CABLE WIRE RED BLACK DRAIN BAYONET PIN A D&B SHELL 9 PIN D-SUB PIN 4 9 SHELL 15 PIN D-SUB PIN 7 5 SHELL 5 PIN MINI-DIN PIN 1 4 3 MOLEX 2 5 6
CONNECTION + EXCITATION
- EXCITATION CASE GND http://..
3.0 PANEL-MOUNT CONFIGURATION
If the panel-mount configuration is supplied, see Figure 1 for cut-out dimensions. Insert the panel-mount display through the front and secure to the panel with four mounting screws (not supplied).
2.25 57.2
1.00 25.4
ø0.15 3.81
1.55 39.37
1.88 47.8
1.73 43.18
Cut Out Dimensions
1.65 41.9
Figure...
