SGM11106C Datasheet | SG Micro

DESCRIPTION The SGM11106C is a single-pole/six-throw (SP6T) antenna switch, which supports from 0.1GHz to 3.0GHz. The device features low insertion loss and high isolation, which make it suitable for high linearity receiving applications. It also has the advantage of high linearity performance. The SGM11106C is not subject to cellular interference and is applied to multi-mode and multi-band LTE mobile phones. The SGM11106C has the ability to integrate SP6T RF switch and MIPI controller on silicon-on-insulator (SOI) process. Internal driver and decoder for switch control signals are offered by the controller, which makes it flexible in RF path band and routing selection. No external DC blocking capacitors are required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost. The SGM11106C is available in a Green UTQFN-2×2-14L package. FEATURES - Supply Voltage Range: 2.4V to 4.8V - Advanced Silicon-On-Insulator (SOI) Process - Frequency Range: 0.1GHz to 3.0GHz - Low Insertion Loss: 0.65d B (TYP) at 2.7GHz - MIPI RFFE Interface patible - No External DC Blocking Capacitors Required - Available in a Green UTQFN-2×2-14L Package BLOCK DIAGRAM SCL SDA VIO VDD MIPI RFFE Interface RF1 RF4 RF2 RF5 RF3 RF6 APPLICATIONS 3G/4G Applications RF Figure 1. SGM11106C Block Diagram SG Micro Corp .sg-micro. DECEMBER 2022 - REV.A.1 SP6T LTE Switch with MIPI RFFE Interface PACKAGE/ORDERING INFORMATION MODEL SGM11106C PACKAGE DESCRIPTION UTQFN-2×2-14L SPECIFIED TEMPERATURE RANGE -40℃ to +85℃ ORDERING NUMBER SGM11106CYURB14G/TR PACKAGE MARKING G3N...