Datasheet4U Logo Datasheet4U.com

SGM21102A - 0.7GHz to 6.0GHz SPDT Switch

General Description

The SGM21102A is a single-pole/double-throw (SPDT) switch for mode switching in WLAN applications.

Key Features

  • low insertion loss and high isolation. The SGM21102A uses advanced switching technologies and supports 0.7GHz to 6.0GHz. The SGM21102A has the ability to integrate SPDT RF switch and GPIO controller on an SOI chip. Internal driver and decoder for switch control signals are offered by the GPIO controller, which makes it flexible in RF path band and routing selection. No external DC blocking capacitors required on the RF paths as long as no external DC voltage is applied, which can save PCB area a.

📥 Download Datasheet

Datasheet Details

Part number SGM21102A
Manufacturer SG Micro
File Size 572.23 KB
Description 0.7GHz to 6.0GHz SPDT Switch
Datasheet download datasheet SGM21102A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM2100 DC-DC Power Management Shengbang Microelectronics
SGM2101 DC-DC Power Management Shengbang Microelectronics
SGM2122 250mA LDO Regulator Shengbang Microelectronics
SGM20 compact physical dimensions Sumitiomo
SGM2005 Linear Regulators Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM21102B 0.3GHz to 6.0GHz SPDT Switch
SGM21102C 20MHz to 6.0GHz SPDT Switch
SGM21102G 20MHz to 4.0GHz SPDT Switch
SGM2013 Linear Regulators
SGM2033 Ultra-Low Noise and High PSRR LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM21102A 0.7GHz to 6.0GHz SPDT Switch GENERAL DESCRIPTION The SGM21102A is a single-pole/double-throw (SPDT) switch for mode switching in WLAN applications. The device features low insertion loss and high isolation. The SGM21102A uses advanced switching technologies and supports 0.7GHz to 6.0GHz. The SGM21102A has the ability to integrate SPDT RF switch and GPIO controller on an SOI chip. Internal driver and decoder for switch control signals are offered by the GPIO controller, which makes it flexible in RF path band and routing selection. No external DC blocking capacitors required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost. The SGM21102A is available in a Green ULGA-0.7×1.1 -6L package. FEATURES ● Supply Voltage Range: 2.4V to 3.