SGM2578A Datasheet PDF (Load Switch) | Download SG Micro SGM2578A

SGM2578A - Load Switch

Description

The SGM2578A is a single load switch with reverse current protection function.

The device can operate from 1V to 5.5V single supply and has the ability to drive up to 2A continuous current.

The device contains a 30mΩ low RON N-MOSFET controlled by the ON pin.

Features

Input Voltage Range: 1V to 5.5V.
Low On-Resistance.
RON = 29mΩ at VIN = 4.35V.
RON = 30mΩ at VIN = 3.3V.
RON = 36mΩ at VIN = 1.0V.
Low Shutdown Current: 90nA (TYP).
Maximum Continuous Current: 2A.
Reverse Current Protection When Disabled.
Low Threshold 1.8V GPIO Control Input.
Bidirectional Power Supply for Power Zone.

Datasheet Details

Part number	SGM2578A
Manufacturer	SG Micro
File Size	1.04 MB
Description	Load Switch
Datasheet	SGM2578A Datasheet
Additional preview pages of the SGM2578A datasheet.

📁 Similar Datasheet

SGM20 - compact physical dimensions (Sumitiomo)

SGM2005 - Linear Regulators (Shengbang Microelectronics)

SGM2006 - RF-Linear Regulators (Shengbang Microelectronics)

SGM2006A - RF-Linear Regulators (Shengbang Microelectronics)

SGM2007 - Linear Regulators (Shengbang Microelectronics)

SGM2007A - Linear Regulators (Shengbang Microelectronics)

SGM2008 - Linear Regulators (Shengbang Microelectronics)

SGM2013N - GaAs N-channel Dual-Gate MES FET (Sony Corporation)

SGM2014AM - GaAs N-channel Dual-Gate MES FET (Sony Corporation)

SGM2014AN - GaAs N-channel Dual-Gate MES FET (Sony Corporation)

Full PDF Text Transcription

Click to expand full text

SGM2578A 5.5V, 2A, 30mΩ RON Load Switch with Reverse Current Protection GENERAL DESCRIPTION The SGM2578A is a single load switch with reverse current protection function. The device can operate from 1V to 5.5V single supply and has the ability to drive up to 2A continuous current. The device contains a 30mΩ low RON N-MOSFET controlled by the ON pin. If the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.

Published: Oct 22, 2024 |