SGM41516
SGM41516 is 3.78A Single-Cell Battery Charger manufactured by SG Micro.
FEATURES
- High Efficiency, 1.5MHz, Synchronous Buck Charger
- 95.5% Charge Efficiency at 1A from 5V Input
- 92.5% Charge Efficiency at 2A from 9V Input
- Optimized for 9V/12V Input
- Selectable PFM Mode for Light Load Efficiency
- USB On-The-Go (OTG) Support (Boost Mode)
- Boost Converter with up to 1.2A Output
- Boost Efficiency of 93.5% at 0.5A and 92.2% at 1A
- Accurate Hiccup Mode Over-Current Protection
- Soft-Start Capable with up to 500μF Capacitive Load
- Output Short-Circuit Protection
- Selectable PFM Mode for Light Load Operations
- Single Input for USB or High Voltage Adaptors
- 3.9V to 13.5V Operating Input Voltage Range
- 22V Absolute Maximum Input Voltage Rating
- Programmable Input Current Limit and Dynamic Power Management (IINDPM, 100m A to 3.1A with 100m A Resolution & 3.8A) to Support USB 2.0 and USB 3.0 Standards and High Voltage Adaptors
- Maximum Power Tracking by Programmable Input Voltage Limit (VINDPM) with Selectable Offset
- VINDPM Tracking of Battery Voltage
- Auto Detect USB BC1.2, SDP, CDP, DCP and Non-Standard Adaptors
- High Battery Discharge Efficiency with 11mΩ Switch
- Narrow Voltage DC (NVDC) Power Path Management
- Instant-On with No or Highly Depleted Battery
- Ideal Diode Operation in Battery Supplement Mode
- Ship Mode, Wake-Up and Full System Reset Capability by Battery FET Control
- Flexible Autonomous and I2C Operation Modes for Optimal System Performance
- Fully Integrated Switches, Current Sense and pensation
- External Direct Charging Path Enable Output
- 9μA Ship Mode Low Battery Leakage Current
- High Accuracy
- ±0.5% Charge Voltage Regulation (8m V/Step)
- ±5% Charge Current Regulation at 1.5A
- ±10% Input Current Regulation at 0.9A
- Safety
- Battery Temperature Sensing (Charge/Boost Modes)
- Thermal Regulation and Thermal Shutdown
- Input Under-Voltage Lockout (UVLO)
- Input Over-Voltage (ACOV) Protection
APPLICATIONS
Smart Phones, EPOS Portable Internet Devices and...
