SGM48211 Datasheet | SG Micro

DESCRIPTION The SGM48211 is a half-bridge MOSFET driver with 4A peak source and sink output current capability, which makes it possible to drive large power MOSFETs with minimized switching losses. The two channels of high-side and low-side are totally independent with 3ns (TYP) delay matching between the turn-on and turn-off of each other. The maximum withstanding voltage of the input stage of SGM48211 is 20V. Due to the -10VDC voltage endurance capacity of its input stage, the driver has enhanced robustness and can be interfaced to pulse transformers directly without using rectifier diodes. With a wide input hysteresis, the device can receive analog or digital PWM signals with improved noise immunity. A 120V rated bootstrap diode is integrated internally to save the external diode and reduce PCB dimension size. Under-voltage lockout (UVLO) is integrated in both the high-side and the low-side drivers. The output of each channel is forced low if the corresponding driving voltage falls below the specified threshold. The SGM48211 is available in Green SOIC-8, SOIC-8 (Exposed Pad) and TDFN-4×4-8AL packages. FEATURES - Wide Operating Range: 8V to 17V - Drive Two N-MOSFETs Configured in Half Bridge - Maximum Blocking Voltage: 120V DC - Integrated Internal Bootstrap Diode for Cost Saving - 4A Peak Sink and Source Currents - -10V to 20V Tolerance of Input Pins - S/TTL patible Inputs - 6.5ns (TYP) Rise Time and 4.5ns (TYP) Fall Time with 1000p F Load - Propagation Delay Time: 31ns (TYP) - Delay Matching: 3ns (TYP) - UVLO Functions for Both High-side and Low-side Drivers - -40℃ to +140℃ Operating Junction Temperature Range - Available in Green SOIC-8, SOIC-8 (Exposed Pad) and TDFN-4×4-8AL Packages APPLICATIONS Power Converters in 48V or Lower Systems Used in Tele, Data, Portable Storage, etc. Half-Bridge, Full-Bridge, Push-Pull, Synchronous-Buck and Forward Converters Synchronous Rectifiers Class-D Audio Amplifiers SG Micro Corp .sg-micro. SEPTEMBER 2024 - REV. A....