Datasheet4U Logo Datasheet4U.com

SGM8435-2 - Wide-Band Differential PLC Driver

Description

The SGM8435-2 is a current feedback, differential wide-band PLC driver, which consists of dual, high voltage, low noise and high slew rate amplifiers.

The high crest factor signals can be driven by the device with very low distortion levels in the power meter.

Features

  • make SGM8435-2 very suitable for power meter wide-band PLC.

📥 Download Datasheet

Datasheet preview – SGM8435-2

Datasheet Details

Part number SGM8435-2
Manufacturer SG Micro
File Size 735.77 KB
Description Wide-Band Differential PLC Driver
Datasheet download datasheet SGM8435-2 Datasheet
Additional preview pages of the SGM8435-2 datasheet.

📁 Similar Datasheet

  • SGM84782 - Low Voltage Analog Switch / Multiplexer (Shengbang Microelectronics)
  • SGM800 - SOT uP Reset (Shengbang Microelectronics)
  • SGM8000C - MLC eMMC (SiliconGo)
  • SGM802 - low-power micro-processor supervisor (Shengbang Microelectronics)
  • SGM803 - Microprocessor Supervisory (Shengbang Microelectronics)
  • SGM804 - low-power micro-processor supervisor (Shengbang Microelectronics)
  • SGM8051 - CMOS Operational Amplifier (Shengbang Microelectronics)
  • SGM8052 - CMOS Operational Amplifier (Shengbang Microelectronics)
  • SGM8053 - CMOS Operational Amplifier (Shengbang Microelectronics)
  • SGM8054 - CMOS Operational Amplifier (Shengbang Microelectronics)
Other Datasheets by SG Micro
  • SGM8422 - Rail-to-Rail I/O OperationalAmplifiers
  • SGM8424 - Rail-to-Rail I/O OperationalAmplifiers
  • SGM8425 - Rail-to-Rail I/O Operational Amplifiers
  • SGM8426 - Rail-to-Rail I/O Operational Amplifiers
  • SGM8428 - Rail-to-Rail I/O Operational Amplifiers
  • SGM8477-1 - Zero-Drift Difference Amplifiers
  • SGM8477-3 - Zero-Drift Difference Amplifiers
  • SGM8478-1C - Over the Rail Difference Amplifier

Full PDF Text Transcription

Click to expand full text
SGM8435-2 Current Feedback, Wide-Band Differential PLC Driver GENERAL DESCRIPTION The SGM8435-2 is a current feedback, differential wide-band PLC driver, which consists of dual, high voltage, low noise and high slew rate amplifiers. The high crest factor signals can be driven by the device with very low distortion levels in the power meter. These features make SGM8435-2 very suitable for power meter wide-band PLC applications. In order to avoid line surges caused by lightning, very reliable protection measures are taken at the output pins of the driver. The SGM8435-2 can operate from 5V to 26V single supply. And it maintains wide bandwidth and high linearity over the whole full-scale range of power supply. A disable control (DIS) pin is used to control the operation modes of the device.
Published: |