Datasheet4U Logo Datasheet4U.com

SGM8903 - Capless 3Vrms Line Driver

General Description

The SGM8903 is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost.

The device is ideal for single supply electronics where size and cost are critical design parameters.

Key Features

  • Capless Structure Eliminates Pop/Clicks Eliminates Output DC-Blocking Capacitors Provides Flat Frequency Response from DC to 20kHz.
  • Low Noise and THD Typical SNR = 107dB Typical VN = 8μVrms Typical THD+N = 0.001% (f = 1.

📥 Download Datasheet

Datasheet Details

Part number SGM8903
Manufacturer SG Micro
File Size 381.17 KB
Description Capless 3Vrms Line Driver
Datasheet download datasheet SGM8903 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM8922 Dual Rail-to-Rail Output Operational Amplifier Shengbang Microelectronics
SGM8924 Dual Rail-to-Rail Output Operational Amplifier Shengbang Microelectronics
SGM8925 Rail-to-Rail Output CMOS Operational Amplifiers Shengbang Microelectronics
SGM8926 Rail-to-Rail Output CMOS Operational Amplifier Shengbang Microelectronics
SGM8927 Rail-to-Rail Output CMOS Operational Amplifiers Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM89000 Capless 2Vrms Line Driver
SGM8902 Capless 2Vrms to 3Vrms Line Driver
SGM8904 Capless 2Vrms to 3Vrms Line Driver
SGM8905 Capless 2Vrms to 3Vrms Line Driver
SGM890B Voltage Detector

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM8903 Capless 3Vrms Line Driver with Adjustable Gain GENERAL DESCRIPTION The SGM8903 is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal for single supply electronics where size and cost are critical design parameters. The SGM8903 is capable of driving 3Vrms into a 2.5kΩ load with 5V supply voltage. The device has differential inputs and uses external gain setting resistors that supports a gain range of ±1V/V to ±10V/V. The use of external gain resistors also allows the implementation of a 2nd-order low pass filter to compliment DAC's and SOC converters. The SGM8903 has build-in shutdown control for pop/click-free on/off control.