Datasheet4U Logo Datasheet4U.com

BL8501 Datasheet Step Down DC/dc Controller

Manufacturer: SHANGHAI BELLING

Overview: .. BL8501 Step down DC/DC controller OUTLINE The BL8501 is a CMOS-based PWM step-down DC-DC Converter controller. The device can offer the following advantages: lower supply current and wider operating input-voltage range. The BL8501 consists of an oscillator, a PWM control circuit, a reference voltage unit, an error amplifier, a soft-start circuit, a protection circuit, a PWM/VFM alternative circuit, a chip enable circuit, and detecting input voltage circuit. A low ripple, high efficiency step-down DC-DC converter can be easily posed of this IC with only several external ponents, or a power-transistor, an inductor, a diode and capacitors. Output Voltage can be adjusted with external resistors.

Datasheet Details

Part number BL8501
Manufacturer SHANGHAI BELLING
File Size 366.76 KB
Description Step down DC/DC controller
Datasheet BL8501_SHANGHAIBELLING.pdf

General Description

Pin No.

1 2 3 4 5 Symbol CE GND VFB EXT VIN Description Chip Enable Pin (Active with “H”) Ground Pin Pin for Feedback Voltage External Transistor Drive Pin (CMOS Output) Power Supply Pin DETAILED DESCRIPTION http://.belling..cn - 1Total 10 Pages 8/8/2006 BL8501 The following description refer to the functional block diagram: Error Amplifier The error amplifier is a high-gain differential amplifier used to regulate the converter output voltage.

The amplifier generates an error signal, which is fed to the PWM parator.

Key Features

  • Range of input Voltage: 3.5V~12V Built-in Soft-start Function and Protection Function (Reset type protection) Oscillation Frequency: 500KHz High efficiency: 90% High Accuracy Output Voltage: 2.0% Low Temperature-Drift Coefficient of Output Voltage: Typ: 100ppm/°C Operating Temperature Range: -20 ~85.

BL8501 Distributor