Datasheet4U Logo Datasheet4U.com

SH69P23 - OTP 4-bit Microcontroller

General Description

SH69P23 is a 4-bit micro controller.

This chip integrates the SH6610C 4-bit CPU core with SRAM, 4K OTPROM, Timer and I/O Ports.

Key Features

  • SH6610C-based single-chip 4-bit micro-controller OTPROM: 4K X 16 bits RAM: 160 X 4 bits (data memory) Operation voltage: 2.4V - 6.0V (typical 3.0V or 5.0V) 14 CMOS bi-directional I/O pins Built in pull-up and pull-low resistor for PortA ~ PortF 4-level subroutine nesting (including interrupts) One 8-bit auto re-load timer/counter Warm-up timer for power on reset Powerful interrupt sources: - Internal interrupt (Timer0) - External interrupts: PortB & PortC (rising/falling edge) Oscillator (OTP op.

📥 Download Datasheet

Datasheet Details

Part number SH69P23
Manufacturer SINO
File Size 239.91 KB
Description OTP 4-bit Microcontroller
Datasheet download datasheet SH69P23 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SH69P20C OTP 1K 4-bit Microcontroller Sino Wealth
SH69P21 OTP 1K 4-bit Microcontroller Sino Wealth
SH69P24 4K LCD & LED Sino Wealth
SH69P25 OTP 4K x 4-Bit Micro-Controller Sino Wealth Microelectronic
SH69P26 OTP 6K 4-Bit Micro-Controller Sino Wealth

Other Datasheets by SINO

Part Number Description
SH69P20 OTP 4-bit Microcontroller
SH69P55 OTP 8K 4-Bit Micro-controller
SH69P552A LCD Driver and 10-bit ADC 4-bit MCU
SH69P55A OTP/MASK 8K 4-Bit Micro-controller
SH69K552A LCD Driver and 10-bit ADC 4-bit MCU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SH69P23 PRELIMINARY Features SH6610C-based single-chip 4-bit micro-controller OTPROM: 4K X 16 bits RAM: 160 X 4 bits (data memory) Operation voltage: 2.4V - 6.0V (typical 3.0V or 5.0V) 14 CMOS bi-directional I/O pins Built in pull-up and pull-low resistor for PortA ~ PortF 4-level subroutine nesting (including interrupts) One 8-bit auto re-load timer/counter Warm-up timer for power on reset Powerful interrupt sources: - Internal interrupt (Timer0) - External interrupts: PortB & PortC (rising/falling edge) Oscillator (OTP option) - X`tal oscillator: 32.768KHz - 4MHz - Ceramic resonator: 400K - 4MHz - RC oscillator: 400K - 4MHz - External clock: 30K - 4MHz Instruction cycle time: - 4/32.768KHz(122us) for 32.