SIT1028Q
Description
VBAT battery supply voltage 2 EN enable input 3 GND ground 4 LIN LIN bus line input/output 5 RXD receive data output; active LOW after a wake-up event 6 TXD transmit data input 7 RSTN voltage regulator reset signal output 8 VCC voltage regulator output NOTE: In the DFN3*3-8 package, the pad on the back is connected to the GND pin of the chip. In order to obtain better heat dissipation performance, the pad on the back can be connected to a suitable "ground" on the PCB board.
Key Features
- Compliant with LIN 2.x, ISO 17987-4:2016 (12V) and SAE J2602
- AEC-Q100 qualified
- 5V/3.3V voltage regulator output with high voltage LDO
- Integrated over-temperature protection function (thermal shutdown)
- Integrated dominant timeout function
- Bus current limiting protection
- 5V/3.3V voltage regulator and current limiting protection
- Voltage regulator output undervoltage detection
- Very low power consumption sleep mode
- Support remote wake-up
