SIT1044Q Datasheet | SIT

芯力特 SIT1044Q 5V Power Supply, 5Mbps CAN FD Transceiver with Standby Mode Features PRODUCT APPEARANCE - patible with the ISO 11898 and SAE J2284-1 to SAE J2284-5 standard - AEC-Q100 qualified - Thermally protected - ±40V BUS Protection - Transmit Data (TXD) dominant time-out function - Low-power standby mode with wake-up function - SIT1044QT/3 and SIT1044QTK/3 can be interfaced directly to microcontrollers with supply voltages from 3.3V to 5V - Under-voltage protection - Timing guaranteed for data rates up to 5 Mbps in the CAN FD fast phase - Very low ElectroMagnetic Emission (EME) - Transceiver in unpowered state disengages from the bus (zero load) - The typical loop delay from TXD to RXD is less than 100ns - Provide SOP8 and DFN3- 3-8 packages Provide Green and Environmentally Friendly Lead-free package DESCRIPTION SIT1044Q is an interface chip used between the CAN protocol controller and the physical bus. It can be used in in-vehicle, industrial control and other fields. It supports 5Mbps (CAN FD) flexible data rate, and has a connection between the bus and the CAN protocol controller. The ability to perform differential signal transmission between the bus and the CAN protocol controller. PARAMETER SYMBOL Supply voltage VIO voltage Maximum transmission rate CANH/CANL input or output voltage Bus differential voltage Virtual junction temperature VCC VIO 1/tbit Vcan Vdiff Tj CONDITION Non-return to zero code...