SIT1057 Datasheet Text
芯力特 5V Power Supply, patible with 3.3V MCU, 5Mbps CAN FD Transceiver
Features
PRODUCT APPEARANCE
- Fully patible with ISO 11898-2:2016/SAE J22841~SAE J2284-5
- AEC-Q100 qualified
- Thermally protected
- ±40V BUS protection
- Transmit Data (TXD) dominant time-out function
- Silent receive mode
- SIT1057T/3 I/O can be interfaced directly to microcontrollers with supply voltages from 3V to 5V
- Undervoltage protection on VCC and VIO power supply pins
- Timing guaranteed for data rates up to 5 Mbps in the
(CAN FD) fast phase
- Very low ElectroMagnetic Emission (EME)
- Unpowered nodes do not interfere with the bus
- The typical loop delay from TXD to RXD is less than
100ns
- Provide SOP8 and DFN3- 3-8 package
Provide green and environmentally friendly lead-free package
DESCRIPTION
SIT1057 is an interface chip used between the CAN protocol controller and the physical bus. It can be used in trucks, buses, cars, industrial control and other fields. It supports 5Mbps (CAN FD) flexible data rate, and has the ability to perform differential signal transmission between bus and the CAN protocol controller.
PARAMETER
Supply voltage
VIO voltage Maximum transmission rate CANH/CANL input or output voltage Bus differential voltage Virtual junction temperature
SYMBOL CONDITION
VCC VIO 1/tbit Vcan Vdiff Tj
Non-return to zero code
MIN. 4.75 2.95
5 -40 1.5 -40
MAX. 5.25...