SLS2302 Datasheet | SLS SEMICONDUCTOR

FEATURES Input voltage: 4.5 V to 20 V Integrated 44 mΩ high-side MOSFET 0.6 V ± 1% reference voltage over temperature Continuous output current: 4 A Programmable switching frequency: 250 k Hz to 1.4 MHz Synchronizes to external clock: 250 k Hz to 1.4 MHz 180° out-of-phase synchronization Programmable UVLO Power-good output External pensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsim Power design tool 20 V, 4 A Synchronous Step-Down Regulator with Low-Side Driver ADP2380 TYPICAL APPLICATIONS CIRCUIT VIN CIN 1 2 3 4 5 ROSC 6 7 CSS 8 PVIN PVIN UVLO BST SW 16 15 14 13 12 11 10 9 RBOT CC_EA RC_EA 09939-001 CBST VOUT COUT ADP2380 SW LD VREG PGND GND FB FET CVREG PGOOD RT SYNC EN/SS P RTOP CCP_EA APPLICATIONS munications infrastructure Networking and servers Industrial and instrumentation Healthcare and medical Intermediate power rail conversion DC-to-dc point of load application 100 95 90 85 Figure 1. EFFICIENCY (%) 80 75 70 65 60 55 50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 OUTPUT CURRENT (A) VOUT = 1.2V VOUT = 3.3V VOUT = 5V 09939-002 Free Datasheet http://.. Figure 2. Efficiency vs. Output Current, VIN = 12 V, f SW = 250 k Hz GENERAL DESCRIPTION The ADP2380 is a current mode control, synchronous, step-down, dc-to-dc regulator. It integrates a 44 mΩ high-side power MOSFET and a low-side driver to provide a high efficiency solution. The ADP2380 runs from an input voltage of 4.5 V to 20 V and can deliver 4 A of output current. The output voltage can be adjusted to 0.6 V to 90% of the input voltage. The switching frequency of the ADP2380 can be programmed from 250 k Hz to 1.4 MHz or fixed at 290 k Hz or 540 k Hz. The synchronization function allows the switching frequency to be synchronized to an external clock to minimize system noise. External pensation and an adjustable soft start provide design flexibility. The power-good output provides simple and reliable power sequencing. Additional features...