USB3500 Datasheet | SMSC

FEATURES - Datasheet - - - - - - - - - - USB-IF “Hi-Speed” certified to the Universal Serial Bus Specification Rev 2.0 Interface pliant with the UTMI+ Specification, Revision 1.0. Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification. Functional as a host, device or OTG PHY. Supports HS, FS, and LS data rates. Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3) Supports HS SOF and LS keep alive pulse. Supports Host Negotiation Protocol (HNP) and Session Request protocol (SRP.) Internal parators support OTG monitoring of VBUS levels. Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) - - - - - - - - Internal 1.8 volt regulators allow operation from a single 3.3 volt supply Internal short circuit protection of ID, DP and DM lines to VBUS or ground. Integrated 24MHz Crystal Oscillator supports either crystal operation or 24MHz external clock input. Internal PLL for 480MHz Hi-Speed USB operation. Supports USB2.0 and legacy USB 1.1 devices 55m A Unconfigured Current (typical) - ideal for bus powered applications. 83u A suspend current (typical) - ideal for battery powered applications. Full mercial operating temperature range from 0C to +70C 56 Pin QFN package; green, lead-free (8 x 8 x 0.90 mm height) SMSC USB3500 Revision 1.0 (04-04-05) Hi-Speed USB Host, Device or OTG PHY With UTMI+ Interface ORDER NUMBER(S): USB3500-ABZJ FOR 56 PIN, QFN PACKAGE (GREEN, LEAD-FREE) 80 Arkay Drive Hauppauge, NY 11788 (631) 435-6000 FAX (631) 273-3123 Copyright © 2005 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, plete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for...