SN8P1706 Datasheet | SONiX

Description V1.90 first issue 1. Extend chip operating temperature from “0°C ~ +70°C” to “-20°C ~ +70°C”. 2. Change the description of ADD M,A instruction from “M 3. Add ADC grade table. 4. Remove “Support hardware multiplier (MUL)” in SN8P1702 FEATURES section. 5. Change “Four internal interrupts” to “Three internal interrupts” in SN8P1704 FEATURES section. 6. Change “ACC can’t be access by “B0MOV” instruction” to “ACC can’t be access by “B0MOV” instruction during the instant addressing mode”. 7. Correct the description of STKn H. 8. Change “special register is located at 08h~FFh” to “special register is located at 80h~FFh”. 9. Correct the bit definition of INTEN register. 10. Correct the description of “TC0 CLOCK FREQUENCY OUTPUT” section. 11. Correct the description of “TC1 CLOCK FREQUENCY OUTPUT” section. 12. SCKMD = 1 means SIO is in SLAVE mode. SCKMD = 0 means SIO is in MASTER mode. 13. Remove “SIO clock and SPI clock are patible”. 14. Modify ADB’s output data table. 15. Correct an error of template code: “b0bclr FWDRST” 16. Add a notice about OSCM register access cycle. 17. SN8P1702/SN8A1702A don’t provide “MUL, PUSH, POP” instruction. 18. Add a notice about OSCM register access cycle. VER 1.94 Sep. 2003 1. Correct EOC description . 2. Correct watchdog timer overflow time. 3. Correct POP operand. 4. Correct ADCKS table. 5. Add new section about checksum calculate must avoid 04H~07H. 6. Reserved Last 16 word ROM...