SN8P2242 Datasheet | SONiX

SN8P2240 Series USB 2.0 Low-Speed 8-Bit Micro-Controller SN8P2240 Series USER’S MANUAL SN8P2242 SN8P22421 SN8P2241 SONi X 8-Bit Micro-Controller SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as ponents in systems intended, for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of the part. SONi X TECHNOLOGY CO., LTD Page 1 Version 1.3 SN8P2240 Series USB 2.0 Low-Speed 8-Bit Micro-Controller Version VER 0.1 VER 0.2 VER 0.3 VER 0.4 VER 1.0 VER 1.1 VER 1.2 VER 1.3 VER 1.4 AMENDMENT HISTORY Date Description 2009/12/03 1. First version is released. 2010/03/11 1. Add Note for USB_INT_EN register in 9.5.4 USB ENABLE CONTROL REGISTER. 2. Add EP0_IN_STALL at IHRCU. 3. Add EP0_OUT_STALL at IHRCL. 2010/03/24 1. Modify CH12 , Regulator GND current 80u A => 60m A 2010/03/30 1. Modify CH12 , I/O source current and sink current. 2. Modify CH12 , Supply current. 3. Modify CH13 , Add P0.0 to programming pin 2010/04/07 1. Modify CH12 , Supply...