S72NS512N
S72NS512N is Based MCPs manufactured by SPANSION.
- Part of the S72NS-N comparator family.
- Part of the S72NS-N comparator family.
..
S72NS-N Based MCPs
Stacked Multi-Chip Product (MCP) Mirror Bit TM Flash Memory & DRAM 128 Mb (8 M x 16 bit)/256 Mb (16 M x 16 bit), 110nm CMOS 1.8 Volt-only, Multiplexed, Simultaneous Read/Write, Burst Mode Flash Memory and 128/256-Mb (8/16-M x 16-bit) DDR DRAM Data Sheet
ADVANCE INFORMATION
Notice to Readers: The Advance Information status indicates that this document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.
Publication Number S72NS128_256ND0_00
Revision B
Amendment 1
Issue Date November 9, 2005
A d v a n c e
I n f o r m a t i o n
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise readers of product information or intended specifications throughout the product life cycle, including development, qualification, initial production, and full production. In all cases, however, readers are encouraged to verify that they have the latest information before finalizing their design. The following descriptions of Spansion data sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more specific products, but has not mitted any design to production. Information presented in a document with this designation is likely to change, and in some cases, development on the product may discontinue. Spansion LLC therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory....