SST SST25VF010A
The SST25VF010A device significantly improves performance, while lowering power consumption. The total energy consumed is a function of the applied voltage, current, and time of application. The SST25VF010A device operates with a single 2.7-3.6V power supply.| Part No. | SST25VF010A |
|---|---|
| Datasheet | SST25VF010A Download |
| Manufacturer |  SST |
| Description | 1 Mbit SPI Serial Flash |
| Buy | Stock & Price |
FEATURES
:● Single 2.7-3.6V Read and Write Operations
● Serial Interface Architecture – SPI Compatible: Mode 0 and Mode 3
● 33 MHz Max Clock Frequency
● Superior Reliability – Endurance: 100,000 Cycles (typical) – Greater than 100 years Data Retention
● Low Power Consumption: – Active Read Current: 7 mA (typical) – Standby Current: 8 µA (typical)
● Flexible Erase Capability – Uniform 4 KByte sectors – Uniform 32 KByte overlay blocks
● Fast Erase and Byte-Program: – Chip-Erase Time: 70 ms (typical) – Sector- or Block-Erase Time: 18 ms (typical) – Byte-Program Time: 14 µs (typical)
● Auto Address Increment (AAI) Programming – Decrease total chip programming time over Byte-Program operations
● End-of-Write Detection – Software Status
● Hold Pin (HOLD#) – Suspends a serial sequence to the memory without deselecting the device
● Write Protection (WP#) – Enables/Disables the Lock-Down function of the status register
● Software Write Protection – Write protection through Block-Protection bits...
