SST45LF010 Datasheet | SST

FEATURES : - - - - Single 3.0-3.6V Read and Write Operations Serial Interface Architecture Byte Serial Read with Single mand Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention - Low Power Consumption - Active Current: 10 m A (typical) - Standby Current: 10 µA (typical) - Sector or Chip-Erase Capability - Uniform 4 KByte sectors - Fast Erase and Byte-Program - Chip-Erase Time: 70 ms (typical) - Sector-Erase Time: 18 ms (typical) - Byte-Program Time: 14 µs (typical) - Automatic Write Timing - Internal VPP Generation - End-of-Write Detection - Software Status - 10 MHz Max Clock Frequency - Hardware Reset Pin (RST#) - Resets the device to Standby Mode - CMOS I/O patibility - Hardware Data Protection (WP#) - Protects and unprotects the device from Write operation - Packages Available - 8-lead SOIC (4.9mm x 6mm) - 8-contact WSON PRODUCT DESCRIPTION The SST45LF010 is a 1 Mbit serial flash memory manufac.. tured with SST’s proprietary, high performance CMOS Super Flash technology. The 1 Mbit of memory is organized as 32 sectors of 4096 Bytes. The flash memory uses a 3wire serial interface and a chip enable to select and sequentially access its data. The serial interface consists of; serial data input (SI), serial data output (SO), serial clock (SCK), and chip enable (CE#). A write protect (WP#) inhibits the entire memory from write operation and a hardware reset pin (RST#) resets the device to standby mode. The SST45LF010 device is offered in both 8-lead SOIC and 8-contact WSON packages. See Figure 1 for the pinouts. Read The Read operation outputs the data in order from the initial accessed address. While SCK is input, the address will be incremented automatically until end (top) of the address space (1FFFFH), then the internal address pointer automatically increments to beginning (bottom) of the address space (00000H), and data out stream will continue. The read data stream is continuous through all addresses until...