SST SST55LC100
The SST55LC100 CompactFlash Card Controller is the heart of a high-performance, flash media-based CompactFlash card solution. The SST55LC100 recognizes the control, address, and data signals on the CompactFlash bus and translates them into memory accesses to the standard NAND-type flash media. The SST55LC100 device supports the Single Level Cell (SLC) media only.| Part No. | SST55LC100 |
|---|---|
| Datasheet | SST55LC100 Download |
| Manufacturer |  SST |
| Description | CompactFlash Card Controller |
| Buy | Stock & Price |
FEATURES
:● CompactFlash Association Specification Revision 2.0 standard
● Interface for standard NAND Flash Media – Flash Media Interface: 8-bit or 16-bit access - Supports up to 8 flash media devices directly – Supports Single-Level Cell (SLC)
● Low power, 3.3V core operation
● 5.0V or 3.3V host interface through VDDQ pins
● Low current operation: – Active mode: 25 mA/35 mA (3.3V/5.0V) (typical) – Sleep mode: 40 µA/50 µA (3.3V/5.0V) (typical)
● 20-byte Unique ID for Enhanced Security – Factory Pre-programmed 10-byte Unique ID – User-Programmable 10-byte ID
● Power Management Unit – Immediate disabling of unused circuitry
● Integrated Power-on Reset Circuit – Industrial Controller requires external POR# signal
● Pre-programmed Embedded Firmware – Performs self-initialization on first system Power-on – Executes industry standard CF commands – Implements dynamic wear-leveling algorithms to substantially increase the longevity of flash media – Embedded Flash File System – Built-in ECC co...
