Datasheet4U Logo Datasheet4U.com

ESDA14V2-4BF3 - Quad bidirectional TRANSIL array

General Description

The ESDA14V2-4BF3 is a monolithic array designed to protect up to 4 lines in a bidirectional way against ESD transients.The device is ideal for situations where board space saving is requested.

This device is particularly adapted to the protection of symmetrical signals.

Key Features

  • 4 Bidirectional Transil functions ESD Protection: IEC61000-4-2 level 4 Stand off voltage: 12 V Min. Low leakage current < 0.5 µA 50 W Peak pulse power (8/20 µs) Flip Chip (5 bumps) Benefits.
  • High ESD protection level High integrationSuitable for high density boards Suitable for high density boards Figure 1. Pin layout (bump side) 3 2 1 A B C Complies with the following standards:.
  • IEC 61000-4-2.
  • 15 kV (air discharge).
  • 8 k.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ESDA14V2-4BF1 QUAD BIDIRECTIONAL TRANSIL-TM ARRAY STMicroelectronics
ESDA14V2-4BF2 QUAD BIDIRECTIONAL TRANSIL-TM ARRAY STMicroelectronics
ESDA14V2 QUAD TRANSIL ARRAY FOR ESD PROTECTION STMicroelectronics
ESDA14V2 DUAL TRANSIL ARRAY FOR ESD PROTECTION STMicroelectronics
ESDA14V2BP6 ESD protection STMicroelectronics

Other Datasheets by STMicroelectronics

Part Number Description
ESDA14V2-1BF3 TVS Clamping Array
ESDA8V2-1J EOS and ESD Transil protection
ESDALC6V1-1BT2 Single line low capacitance Transil
ESDALC6V1-1BU2 Single-line low capacitance
ESDALC6V1-1U2 TVS Clamping Arrays

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com ESDA14V2-4BF3 Quad bidirectional Transil™ array for ESD protection Features ■ ■ ■ ■ ■ 4 Bidirectional Transil functions ESD Protection: IEC61000-4-2 level 4 Stand off voltage: 12 V Min. Low leakage current < 0.5 µA 50 W Peak pulse power (8/20 µs) Flip Chip (5 bumps) Benefits ■ ■ ■ High ESD protection level High integrationSuitable for high density boards Suitable for high density boards Figure 1. Pin layout (bump side) 3 2 1 A B C Complies with the following standards: ■ IEC 61000-4-2 – 15 kV (air discharge) – 8 kV (contact discharge) MIL STD 883E- Method 3015-7: class3 ■ – 25 kV (human body model) Figure 2.