Datasheet4U Logo Datasheet4U.com

LSM330DLC - iNEMO inertial module:3D accelerometer and 3D gyroscope

General Description

The LSM330DLC is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope.

Table 1.

Key Features

  • Analog supply voltage: 2.4 V to 3.6 V Digital supply voltage IOs: 1.8 V Low power mode Power-down mode 3 independent acceleration channels and 3 angular rate channels ±2 g/±4 g/±8 g/±16 g dynamically selectable full scale ±250/±500/±2000 dps dynamically selectable full scale SPI/I C serial interface (16-bit data output) Programmable interrupt generator for free-fall and motion detection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LSM330 3D accelerometer and 3D gyroscope STMicroelectronics
LSM335 3 Amp Schottky Rectifier Microsemi Corporation
LSM303AGR ultralow-power 3-axis accelerometer and 3-axis magnetometer STMicroelectronics
LSM303D 3D accelerometer and 3D magnetometer module STMicroelectronics
LSM303DLH 3-axis accelerometer and 3-axis magnetometer STMicroelectronics

Other Datasheets by STMicroelectronics

Part Number Description
LSM330DL Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor
LSM330D iNEMO inertial module:3D accelerometer and 3D gyroscope

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr LSM330DLC iNEMO inertial module: 3D accelerometer and 3D gyroscope Preliminary data Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Analog supply voltage: 2.4 V to 3.6 V Digital supply voltage IOs: 1.8 V Low power mode Power-down mode 3 independent acceleration channels and 3 angular rate channels ±2 g/±4 g/±8 g/±16 g dynamically selectable full scale ±250/±500/±2000 dps dynamically selectable full scale SPI/I C serial interface (16-bit data output) Programmable interrupt generator for free-fall and motion detection ECOPACK® RoHS and “Green” compliant 2 LGA-28L (4x5x1.1 mm) ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers.