Datasheet4U Logo Datasheet4U.com

M29W200BT - 2 Mbit 256Kb x8 or 128Kb x16 / Boot Block Low Voltage Single Supply Flash Memory

Description

The M29W200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single low voltage (2.7 to 3.6V) supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Features

  • operations from accidentally damaging the data during power up, power down and power surges. If the Program/ Erase Controller is programming or.

📥 Download Datasheet

Datasheet preview – M29W200BT

Datasheet Details

Part number M29W200BT
Manufacturer STMicroelectronics
File Size 144.11 KB
Description 2 Mbit 256Kb x8 or 128Kb x16 / Boot Block Low Voltage Single Supply Flash Memory
Datasheet download datasheet M29W200BT Datasheet
Additional preview pages of the M29W200BT datasheet.
Other Datasheets by ST Microelectronics

Full PDF Text Transcription

Click to expand full text
M29W200BT M29W200BB 2 Mbit (256Kb x8 or 128Kb x16, Boot Block) Low Voltage Single Supply Flash Memory PRELIMINARY DATA s SINGLE 2.7 to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 55ns PROGRAMMING TIME – 10µs per Byte/Word typical 7 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 4 Main Blocks 1 44 s s s s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP48 (N) 12 x 20mm SO44 (M) s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.
Published: |