M34S32 Datasheet | STMicroelectronics

DESCRIPTION The M34S32 is a 32K bit electrically erasable programmable memory (EEPROM), organized as 4096 x 8 bits. Table 1. Signal Names SDA SCL WC WCR VCC VSS Serial Data Address Input/Output Serial Clock Write Control Write Control of Control Register Supply Voltage Ground SCL WC WCR M34S32 AI02468 June 1998 This is a Preliminary Data. Details are subject to change without notice. 1/18 Figure 3. DIP Pin Connections Figure 4. SO Pin Connections M34S32 NC NC WCR VSS 1 2 3 4 8 7 6 5 AI02448 M34S32 VCC WC SCL SDA NC NC WCR VSS 1 2 3 4 8 7 6 5 AI02449 VCC WC SCL SDA Table 2. Absolute Maximum Ratings(1) Symbol TA TSTG Ambient Operating Temperature Storage Temperature Lead Temperature, Soldering TLEAD (SO8 package) (PSDIP8 package) Input or Output Voltages Supply Voltage (Human Body model) Electrostatic Discharge Voltage VESD Electrostatic Discharge Voltage 1. MIL-STD-883C, 3015.7 (100 p F, 1500 Ω) Parameter Value - 40 to 125 - 65 to 150 40 sec 10 sec 215 260 - 0.6 to 6.5 - 0.3 to 6.5 4000 Unit °C °C °C °C V V V VIO VCC (Machine model) 2. EIAJ IC-121 (200 p F, 0 Ω) (Condition C) Note: 1. Except for the rating “Operating Temperature Range”, stresses above those listed in the Table “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. 2/18 DESCRIPTION (cont’d) The memory is patible with the I2C extended addressing standard, two wire serial interface which uses a bi-directional data bus and serial clock. The memory carries a built-in 4 bit, unique device identification code (1010) corresponding to the I2C bus definition. The memory behaves as slave...