SN260 Datasheet | STMicroelectronics

Features - - Integrated 2.4GHz, IEEE 802.15.4-pliant transceiver: - Robust RX filtering allows co-existence with IEEE 802.11g and Bluetooth devices - - 97.5d Bm RX sensitivity (1% PER, 20byte packet) - + 3d Bm nominal output power - Increased radio performance mode (boost mode) gives - 98.5d Bm sensitivity and +5d Bm transmit power - Integrated VCO and loop filter - Secondary TX-only RF port for applications requiring external PA. Integrated IEEE 802.15.4 PHY and MAC Dedicated peripherals and integrated memory Ember ZNet™ Zig Bee®-pliant stack running on the dedicated network processor Controlled by the Host using the Ember ZNet™ Serial Protocol (EZSP) - Standard serial interface (allows for connection to a variety of Host micro controllers) Non-intrusive debug interface (SIF) Integrated hardware and software support for In Sight Development Environment Provides integrated RC oscillator for low power operation Three sleep modes: - Processor idle (automatic) - Deep sleep- 1.0µA - Power down- 1.0µA Watchdog timer and power-on-reset circuitry Integrated AES encryption accelerator Integrated 1.8V voltage regulator patible with Ember EM250 TX_ACTIVE - - - - - - - - - - - PA select RF_TX_ALT_P,N PA SYNTH PA DAC MAC + Baseband Packet Trace RF_P,N BIAS_R OSCA LNA Bias Network Processor (XAP2b) Encryption acclerator HF OSC Network Processor Peripherals Integrated Flash and RAM OSCB Internal RC-OSC Serial Controller Interrupt Controller Always powered Sleep timer POR n RESET SIF_CLK VREG_OUT Regulator Chip manager Watchdog SIF SIF_MISO SIF_MOSI n...