ST16600 Datasheet | STMicroelectronics

FEATURES INCLUDING EEPROM FLASH ERASE CONTACT ASSIGNMENT PATIBLE ISO 7816-2 ESD PROTECTION GREATER THAN 5000V 2 OPERATING CONFIGURATIONS - ISSUER - USER Wafer s s s s s s s BD.600/9809V1 This is Brief Data from STMicroelectronics. Details are subject to change without notice. For plete data, please contact your nearest Sales Office or Smart Card Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29 1/2 DESCRIPTION The ST16600, a member of the standard ST16 device family, is a serial access microcontroller especially designed for high volume and cost petitive Smartcard applications where firmware security algorithm must be implemented. The ST16600 is based on 8 bit CPU core and includes on chip memories: 128 Bytes of RAM, 6 KBytes of USER ROM, 1 KByte of SYSTEM ROM, and 512 Bytes of EEPROM. Both ROM and EEPROM memories can be configured into two sectors. Access rules from any memory section or sector to any other are set-up by the User’s defined Memory Access Control Matrix (MACM). Reliability data related to the ST16600 product manufactured using STMicroelectronics advanced CMOS EEPROM technology confirm data retention up to 10 years and endurance up to 300,000 Erase/Write cycles. As all other ST16 family members, the ST16600 is fully patible with the ISO standards for Smartcard applications. Software development (ROM code, options) can be pleted by the ST16-19HDS development system. The ST16600 can be delivered either in unsawn or sawn wafers, 180 or 275 micron thickness as well as in micromodule package. Figure 1. Block Diagram V GENERATION PP 8 BIT 128 SYSTEM ROM 1 KBtytes 6 KBytes BYTES SECTORS BIN. SECT. S SECT. A SECT. B EEPROM 512 Bytes SECTORS BINATIVE SECTOR A SECTOR B MEMORY ACCESS CONTROL MATRIX INTERNAL BUS RST SERIAL I/0's INTERFACE NUMBER GENERATOR SECURITY LOGIC V CC I/O1 I/O2 SCP...