ST16RF58 Datasheet | STMicroelectronics

FEATURES INCLUDING EEPROM FLASH ERASE ESD PROTECTION GREATER THAN 5000V 2 OPERATING CONFIGURATIONS - ISSUER - USER Wafer s s s s s CONTACTLESS SPECIFIC FEATURES 13.56 MHZ OPERATION 106 KBIT/S DATA TRANSFER AMPLITUDE MODULATION READER TO CARD LOAD MODULATION CARD TO READER 3V OPERATION s CONTACT SPECIFIC FEATURES EXTENDED VOLTAGE OPERATION, Vcc Range: 2.7V to 5.5V SERIAL ACCESS, ISO 7816-3 PATIBLE UP TO 5 MHz INTERNAL OPERATING FREQUENCY CONTACT ASSIGNMENT PATIBLE ISO 7816-2 s s s s s BD.RF58/9809VP2 This is Brief Data from STMicroelectronics. Details are subject to change without notice. For plete data, please contact your nearest Sales Office or Smart Card Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29 1/2 DESCRIPTION The ST16RF58, a member of the standard ST16 device family, is a serial access microcontroller especially designed for large volume contactless/ contact Smartcard applications. The ST16RF58 is based on 8 bit CPU core and includes on chip memories: 512 Bytes of RAM, 22 KBytes of USER ROM, 5 KBytes of SYSTEM ROM, and 8176 Bytes of EEPROM. Both ROM and EEPROM memories can be configured into two sectors. Access rules from any memory section or sector to any other are set-up by the User’s defined Memory Access Control Matrix (MACM). Reliability data related to the ST16RF58 product, manufactured using STMicroelectronics’ advanced CMOS EEPROM technology, confirm data retention of up to 10 years and endurance up to 300,000 Erase/Write cycles. Contact operation is fully patible with the ISO standards for Smartcard applications. Figure 1 Block Diagram VCC GENERATION RAM 8 BIT CPU SYSTEM ROM ROM 512 Bytes 5 KBytes 22 KBytes SECTORS BIN. EEPROM 8176 Bytes SECTORS BINATIVE SECTOR A SECTOR B SECT. S SECT. A SECT. B MEMORY ACCESS CONTROL MATRIX INTERNAL BUS RST SERIAL I/0 INTERFACE RF INTERFACE NUMBER GENERATOR SECURITY LOGIC V CC AC1 I/O1 AC0 GND SCP...