ST19RF08 Datasheet | STMicroelectronics

FEATURES INCLUDING EEPROM FLASH PROGRAM 8 BIT TIMER HARDWARE DES ACCELERATOR SOFTWARE DES LIBRARY - DES, triple DES, DESX putations - CBC chaining mode Wafer s s s CONTACTLESS SPECIFIC FEATURES s ISO 14443 TYPE B s 13.56 MHZ CARRIER FREQUENCY HARDWARE CRC CALCULATION 106, 212 and 424 KBIT/S DATA TRANSFER AMPLITUDE MODULATION READER TO CARD LOAD MODULATION CARD TO READER INTERFACE WITH RF READERS SUPPORTED THROUGH A LIBRARY OF EMBEDDED SOFTWARE FUNCTION PATIBLE WITH ISO 14443 STANDARD. CONTACT SPECIFIC FEATURES s SERIAL ACCESS, ISO 7816-3 PATIBLE s s s s s s 3V ± 10% AND 5V ± 10% SUPPLY VOLTAGE POWER SAVING STANDBY MODE UP TO 10 MHz INTERNAL OPERATING FREQUENCY CONTACT ASSIGNMENT PATIBLE ISO 7816-2 ESD PROTECTION GREATER THAN 5000V s s s s October 1999 This is Brief Data from STMicroelectronics. Details are subject to change without notice. For plete data, please contact your nearest Sales Office or Smart Card Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29 1/2 HARDWARE DESCRIPTION The ST19RF08, a member of the ST19 device family, is a serial access microcontroller especially designed for very large volume and cost petitive secure portable objects. The ST19RF08 is based on a STMicroelectronics 8 bit CPU core including on-chip memories: 960 Bytes of RAM, 32 K Bytes of USER ROM and 8 K Bytes of EEPROM. RAM, ROM and EEPROM memories can be configured into partitions. Access rules from any memory partition to another partition are setup by the user defined Memory Access Control Logic. It is manufactured using the highly reliable ST submicron technology. As all other ST19 family members, it is fully patible with the ISO standards for Smartcard applications: - ISO7816 for contact operation, - ISO14443 for contactless operation. SOFTWARE DEVELOPMENT DESCRIPTION Software development and firmware (ROM code/ options) generation are pleted by the ST16-19 HDSE development system. Figure 1 Block Diagram EEPROM USER ROM 960 Bytes 8K...