STB0899 Datasheet | STMicroelectronics

DESCRIPTION The STB0899 advanced demodulator from STMicroelectronics enables digital set-top boxes to process base-band DVB-S2 signals into digital video transport stream data. This data is then ready to be fed directly to the STB decoder. By incorporating the DVB-S standard, the STB0899 supports seamless migration to DVB-S2 services. The STB0899 and STB6100 silicon tuner may be coupled with a decoder from ST’s OMEGA range, thus forming a plete silicon solution for DVB-S / DVB-S2 set-top boxes. The interface between these devices has been designed to ensure simple layouts and the lowest possible bill of materials cost. Package (208 pin PQFP package) xxxx Figure 1. STB0899 DVB-S2 set-top box Tuner I²C Demodulator TS Back-end chip STB6100 I, Q Clk STB0899 OMEGA decoder I²C LNB power supply LNBP22 Di SEq C Rev. 1 December 2004 1/2 Features - DVB-Q2 demodulator and decoder - QPSK, 8PSK, 4 + 12 APSK - Hierarchical 8PSK enhanced processor - DVB-S2 pilot processing - LDPC and BCH decoding - Supports all DVB-S2 bit rates - DVB-S2 framing - - - patible with direct conversion tuners - Dual 8-bit analogue conversion - Dual Σ∆ digital split AGC RF/BB - Wide range carrier tracking loop - Flexible clock generation Transport decoder - pliant with DVB mon interface - 12-bit parallel and 7-bit serial interface Legacy support for DVB-S and DIRECTV® QPSK modes Digital carrier and timing recovery loops - - Di SEq C 2.0 22 k Hz to 100 k Hz interface TQPFP 100 exposed pad...