STG4158 Datasheet | STMicroelectronics

Low-voltage 0.6 Ω typ. single SPDT switch with break-before-make feature and 15 k V ESD protection - production data Features - Power-off and overvoltage protection - Wide operating voltage range: VCC (opr) = 1.65 to 4.5 V - Low ON-resistance VIN = 0 V: - RON = 0.85 Ω (max.) at VCC = 4.5 V - Latch-up performance exceeds 300 m A JESD 17 - ESD performance tested on (D pin) - 8 k V IEC-61000-4-2 ESD, contact discharge - 15 k V IEC-61000-4-2 ESD, air discharge - ESD performance test on all other pins - 3 k V human body model - 200 V machine model (IEC61340-3-2 level M2) - 1000 V charge device model (JESD22 C101) Description The STG4158 is a high-speed CMOS low-voltage single analog SPDT (single-pole dual throw) switch or 2:1 multiplexer/demultiplexer switch fabricated in silicon gate C2MOS technology. Designed to operate from 1.65 to 4.5 V, this device is ideal for portable applications. It offers low ON-resistance (0.6 Ω) at VCC = 4.5 V (typical TA = 25 °C). The SEL input threshold is patible with 1.8 V, and provides control to the switches. Flip Chip6 W7a Af Fe Er R The switch S1 is ON (connected to mon port D) when the SEL input is held high and OFF (high-impedance state exists between the two ports) when SEL is held low. The switch S2 is ON (connected to mon port D) when the SEL input is held low and OFF (high-impedance state exists between the two ports) when SEL is held high. The SEL input has an integrated weak pull-down resistor to prevent the SEL signal from floating. For low-power consumption, the SEL input must be grounded. The STG4158 Features power-off and overvoltage protection, enabling the device to be isolated during voltage fault events. Table 1. Device summary Order code STG4158BJR JSTG4158-CD1 Package Flip Chip6 Packing Tape and reel Unsawn wafer April 2012 This is information on a product in full production. Doc ID 14140 Rev...