STV0288 Datasheet | STMicroelectronics

.. DVB-S and DIRECTVTM QPSK receiver with autoscan feature DATA BRIEF DESCRIPTION STMicroelectronics introduces the STV0288, its latest DVB and DIRECTV TM QPSK digital receiver, which adds blind scan capability and Di SEq C 2.0 to the industry-leading STV0299 and provides a cost reduction path or new products. The STV0288 contains two 8-bit analog-to-digital converters for I-input and Q-input, a QPSK demodulator, and a forward error correction (FEC) unit having both an inner (Viterbi) and an outer (Reed-Solomon) decoder. The device accepts baseband differential signals as I and Q inputs. High-performance clock generation is made from an external reference which can vary from 4 to 30 MHz with respect to the analog to digital conversion which is performed by two 8-bit ADC. The FEC unit is pliant with the DIRECTVTM and DSS specifications. Processing is fully digital and an on-chip performant state-machine enables blind search of satellite transponders without a-priori knowledge of symbol rate. Thanks to this new feature, the amount of software required for the driver to operate the demodulator chip is drastically reduced versus the previous generation. The high sampling rate facilitates the implementation of low-cost, direct conversion tuners. The STV0288 is controlled via an I²C interface. The device operates up to 120 MHz and can process variable modulation rates, up to 60 Msps. The chip outputs MPEG transport streams and interfaces seamlessly to the packet demultiplexers embedded in the ST Omega chip family. Its low power consumption, small package and low bill of material makes it perfect for all satellite applications. Figure 1. Package (TQFP64 with non exposed pas) xxxx Rev. 1 1/3 Figure 2. STV0288 DRAM IR RX/TX STV0288 and STB6000 tuner transport stream in STM5105 Audio buffer Video buffer Smart card Features TM n DVB-S / DIRECTV system n n n n n n NOR Flash Di SEq CTM 2.0 22 k Hz to 100 k Hz interface Flexible GPIOs...