Datasheet4U Logo Datasheet4U.com

STV7710 - Vacuum Fluorescent Display (VFD) Driver

General Description

rod STV7710 is a driver for vacuum fluorescent P display (VFD) designed in the ST proprietary BCD te high voltage technology.

le outputs.

The STV7710 is supplied with a so separated 70V power output supply.

Key Features

  • Figure 1. Block diagram.
  • 96 outputs VFD driver.
  • 90 V absolute maximum supply CLK F/R TEST.
  • 3.3V/5V compatible logic.
  • -40/30mA source/sink output MOS DATA_A 96bit Shift register DATA_B.
  • -50/50mA source/sink output diode P1 P96.
  • 1-bit data bus (40 MHz) ).
  • BCD process t(s.
  • Packaging: die form uc.

📥 Download Datasheet

Other Datasheets by STMicroelectronics

Part Number Description
STV7778S DEFLECTION PROCESSOR FOR MULTISYNC MONITOR
STV7610A PLASMA DISPLAY PANEL DATA DRIVER
STV7617 PLASMA DISPLAY PANEL SCAN DRIVER
STV7620 PLASMA DISPLAY PANEL DATA DRIVER
STV7620M PLASMA DISPLAY PANEL DATA DRIVER
STV7697A PLASMA DISPLAY PANEL SCAN DRIVER
STV7697B Scan Driver for Plasma Display Panels
STV7699 PLASMA DISPLAY PANEL DATA DRIVER
STV7801S PLASMA DATA POWER SWITCH
STV0042A SATELLITE SOUND AND VIDEO PROCESSORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
STV7710 Vaccum fluorescent display (VFD) driver Features Figure 1. Block diagram ■ 96 outputs VFD driver ■ 90 V absolute maximum supply CLK F/R TEST ■ 3.3V/5V compatible logic ■ -40/30mA source/sink output MOS DATA_A 96bit Shift register DATA_B ■ -50/50mA source/sink output diode P1 P96 ■ 1-bit data bus (40 MHz) ) ■ BCD process t(s ■ Packaging: die form uc Description rod STV7710 is a driver for vacuum fluorescent P display (VFD) designed in the ST proprietary BCD te high voltage technology. Using a 1 bit wide data bus, it can control 96 high current & high voltage le outputs. The STV7710 is supplied with a so separated 70V power output supply. All command b inputs are CMOS and 3.3V logic levels Obsolete Product(s) - O compatible.